Transmission And Hydraulic Fluid
This data sheet is based on The Elf product TractorElf BF80.
DESCRIPTION
A transmission and hydraulic oil for tractors and contractors plant.
APPLICATIONS
- Transmissions and final drives including those with "wet" brakes of most tractors and contractors plant.
- Hydraulic and power steering systems.
- Torque converters requiring Allison C3 and C4 fluids.
- Caterpillar equipment requiring TO-2 fluids
NOTE: Whilst all reasonable care has been taken to ensure the accuracy of this data at time of publication minor variations may occur.
PROPERTIES
- Wide operating temperature range.
- Excellent wear resistance for gears and pumps.
- High water tolerance for humid atmospheres.
- Prevents "squawk" from oil immersed brakes.
- Provides sufficient friction to operate P.T.O.'s.
- Good foam resistance.
ADVANTAGES
- Single oil with which to service nearly every tractor transmission and hydraulic system.
- Provides an extremely effective alternative to "Universal" oil when a separate engine oil is preferred.
CLASSIFICATIONS
TRANSMISSIONS |
HYDRAULICS |
|
| John Deere J20A/ J20C | Sundstrand Test = Pass | |
| Massey Ferguson M.1127A&B, M.1129A, M.1135, M.1141, M.1143 | Vickers 104C | |
| J.I. Case 143, 145, Case MS 1207 | Vickers (IP281) Vane weight loss: 46mg | |
| Ford M2C86C, M2C134D | ||
| Allison C4 | GEARS | |
| Caterpillar TO-2 | API GL4/CRC L-20 | |
| API GL5/CRC L-37 (with broken-in gears) | ||
| FZG ³ Stage 12 | ||
| Four Ball Wear: Wear scar diameter, 0.312 mm | ||
| Four Ball Weld: Weld load, 210 kg |
TYPICAL CHARACTERISTICS |
|
| SAE | 10W/30 |
| Relative Density @ 15.6°C | 0.885 |
| Kinematic Viscosity @ 100°C, mm²/s | 65.4 |
| Kinematic Viscosity @ 100°C, mm²/s | 10.9 |
| Viscosity Index | 158 |
| Pour Point, °C | -33 |
Pay Online
