Hydraulic Oils

This data sheet is based on The Elf product "Tecnic Super 15W/40".

Description

Fully inhibited, quality hydraulic oils available in the more common ISO Grades 32, 46 and 68.

Qualities

Good anti-wear performance
Low pour points
Resistance to high temperature oxidation
Anti-rust and anti-corrosion additives

Advantages

High viscosity index ensures low temperature fluidity.
Resistance to oxidation protects pump components and valve mechanisms from harmful lacquer deposits.
Anti-rust and anti-corrosion additives protect the system when at rest.
Good air release and anti-foaming additives ensure rapid collapse of foam likely to be formed in reservoirs.
Good demulsification ensures separation of any entrained water droplets.

TECNIC SUPER 15W/40

This is a high quality mixed fleet engine oil. It is suitable for use in turbocharged and naturally aspirated engines, both petrol and diesel, and offers extended drain potential.

It is also suitable for Caterpillar equipment where 15W/40 or TO-2 oils are specified.

» Customer Safety Information

NOTE: Whilst all reasonable care has been taken to ensure the accuracy of this data at time of publication minor variations may occur.

Classifications
DIN 51524, PART II HLP	FORD: M-6C32
DENISON: HF-2	VICKERS: 1-286-S, M-2950-S
CINCINNATI MILACRON: P68, P69, P70	AFNOR NFE 48603 (HM)

Typical Characteristics
ISO Grade	32	46	68
Relative Density @ 15.6°C	0.865	0.877	0.88
Kinematic Viscosity @ 40°C, mm²/s	32	46	65
Flash Point, °C	197	205	221
Copper Corrosion, 3 hrs @ 100°C	1a	1a	1a